In Toronto and across the GTA, dryer repairs typically cost $100 to $350 CAD depending on which part has failed. The diagnostic fee is $95 plus HST ($129 plus HST for gas), confirmed upfront and applied toward the repair on the same visit. This guide breaks down the cost of each common fix — heating element, drive belt, thermal fuse, and more — so Ontario homeowners and renters can budget accurately before booking. Fall and winter are the heaviest months for dryer use, and the time between a breakdown and a repair call matters.
Key Takeaways
- Dryer repairs in Toronto range from $100 to $350 CAD for the most common faults — heating element, drive belt, thermal fuse, and thermostat.
- The diagnostic fee is confirmed upfront and applied toward the repair cost on the same visit, so you pay one combined price when the work proceeds.
- Gas dryer repairs must be carried out by licensed technicians; internal gas components should never be self-inspected when a gas supply problem is suspected.
- A blown thermal fuse almost always points to a blocked dryer vent — the vent must be cleared before a replacement fuse will last.
- Same-day dryer repair services are available in Toronto and across the GTA, including for electric and gas dryers across all major brands.
- Lint buildup is a common cause of dryer fires; Toronto Fire Services recommends metal venting over plastic or foil ducting for all residential dryer installations.
As the temperature drops across the GTA, dryers run harder and more often. A dryer that stops heating, takes two cycles to dry a load, or starts making loud noises is not a problem that improves on its own.
This guide is for Toronto homeowners and renters who want to know what a dryer repair actually costs before booking a visit — and what the failed part is likely to be.
How Much Does It Cost to Repair a Dryer in Toronto?
The total cost of a dryer repair in Toronto depends on two things: the part that has failed and whether the dryer runs on electricity or gas. Most common repairs fall in the $100 to $350 CAD range for parts and labour combined.
The diagnostic fee is $95 plus HST ($129 plus HST for gas), confirmed upfront and applied toward the repair cost on the same visit. Most dryer repairs are completed in a single visit for dryer repair Toronto appointments when parts are in stock.
The table below gives approximate price ranges by fault and part. These are market estimates — the exact cost depends on the dryer brand, model, and the labour involved.
| Fault | Typical repair cost (CAD) |
|---|---|
| Heating element (electric) | $150–$280 |
| Gas igniter / valve coils | $150–$300 |
| Drive belt | $120–$200 |
| Idler pulley | $100–$180 |
| Thermal fuse | $100–$180 |
| High-limit thermostat | $120–$200 |
| Drum bearing | $150–$280 |
| Control board | $250–$420 |
A repair that costs under half the price of a comparable new dryer — mid-range models in Canada run $600 to $1,600 CAD — is almost always worth proceeding with on a machine under eight years old. For the full repair-vs-replace framework, see the guide on whether dryer repair is worth it.
Dryer Repair Cost by Part
Heating Element or Gas Igniter
No heat is the most common dryer complaint across Toronto. In electric dryers, the component responsible is the heating element — a coiled resistance wire inside the dryer cabinet that heats the air passing through the drum. When it fails, the drum turns but no heat is produced. Clothes come out damp regardless of cycle length.
Heating element replacement typically costs $150 to $300 CAD in parts and labour. The part itself varies in price by brand, and labour depends on how accessible the element is in that specific model.
In gas dryers, the equivalent components are the igniter and the valve coils. The igniter lights the gas burner at the start of each cycle. When it fails, you may hear the gas valve click and then nothing — no flame, no heat. Valve coil failure produces a similar symptom. Both are standard repair items and fall in a similar cost range to electric element work.
A single failed heating element or igniter is one of the most cost-effective dryer repairs available. The part is a standard service item across all major brands, and the diagnostic visit confirms exactly which component has failed before any repair work is approved.
For a detailed breakdown of why a dryer stops producing heat and which component is most likely responsible, see dryer not heating: causes and fixes.
Drive Belt and Idler Pulley
A dryer drum that does not turn — the motor runs, you hear it, but the drum sits still — almost always means a snapped drive belt. The drive belt wraps around the drum, the idler pulley, and the motor shaft. When it snaps, the drum loses all rotational force.
Drive belt replacement typically costs $100 to $200 CAD. It is one of the more straightforward dryer repairs because the belt is an accessible component in most models, and the part itself is inexpensive.
The idler pulley maintains tension on the worn belt and wears over time. A failing idler pulley produces loud noises — squealing or squeaking during the drying cycle — often confused with a drum bearing problem. Replacing the idler pulley at the same time as the belt is standard practice when both show wear.
Overloading the dryer consistently is the most common cause of premature belt failure. Large or dense loads — heavy winter coats, king-size duvets, multiple pairs of jeans — strain the motor and belt beyond their design load and shorten their working life.
For the full guide on what causes dryer squealing and what the repair involves, see how to fix a squeaky dryer.
Thermal Fuse and Thermostat
A thermal fuse is a one-time safety component. When the dryer reaches a dangerous temperature — from a blocked vent, a failed thermostat, or a restricted airflow path — the thermal fuse blows to prevent a fire. Once blown, it does not reset. The dryer stops producing heat or stops starting entirely.
Thermal fuse replacement typically costs $100 to $180 CAD. It is a low-cost part, but replacing it without addressing the root cause means the new fuse will blow again within a few cycles.
The high-limit thermostat works alongside the thermal fuse to regulate temperature. A failed thermostat allows the dryer to run too hot, which then triggers fuse failure. Replacing the fuse alone while leaving a faulty thermostat in place is one of the most common causes of repeat repair calls.
Both the thermal fuse and thermostat are accessible to a technician on the same visit, and both are typically tested and replaced together when overheating is the presenting symptom.
For dryers taking two full cycles to dry a load — a symptom closely related to restricted airflow and thermal system strain — the guide on why your dryer takes too long to dry clothes covers the full picture.
Gas vs Electric Dryer Repair Cost
The repair cost for gas and electric dryers is broadly similar for most fault types — belts, pulleys, thermostats, and fuses cost about the same to replace regardless of fuel type.
The difference appears on jobs that involve the gas supply components. In Ontario, any work involving gas lines, the gas valve, or internal gas components must be carried out by a licensed gas technician. This is a requirement under provincial safety regulations, not a preference. A gas dryer should never be internally inspected by a homeowner when a gas supply problem is suspected — the correct first step is to call a licensed technician and ensure the gas supply to the unit is isolated.
Toronto Appliance Repairs technicians are licensed to service both gas and electric dryers across all major brands, including Whirlpool, LG, Samsung, GE, Frigidaire, Kenmore, KitchenAid, Maytag, and Electrolux.
Electric dryers require a dedicated 240-volt outlet. A dryer that fails to start should prompt a check of the electrical panel for a tripped breaker before any repair call is booked — this is one of the few checks a homeowner can safely make without tools.
Why Dryer Vents Cause Repeat Repairs
A blocked dryer vent is the single most common cause of recurring issues and repeat dryer repairs in Toronto.
When the vent duct is clogged — by lint, a damaged hose, a crushed section, or a bird nest at the exterior outlet — the dryer cannot expel hot, moist air. The internal temperature climbs. The thermal fuse blows. A technician replaces the fuse. The vent remains blocked. The fuse blows again.
Lint buildup is a common cause of dryer fires. Toronto Fire Services recommends metal venting over plastic or foil ducting for all residential dryer installations. Metal ducts resist crushing, hold their shape over time, and are far less likely to allow lint to accumulate in folds and bends.
Cleaning the lint screen after every load is essential for dryer maintenance. But the lint trap catches only a fraction of the fibre produced by each drying cycle. The remainder travels through the duct and accumulates over months. Regular inspection and cleaning of the dryer duct are necessary for both safety and consistent dryer efficiency.
If a technician replaces your thermal fuse and you want to understand the vent system before or after the repair, the guides on who to call for dryer vent repair and how to clean a dryer vent cover both options.
Can I Fix My Dryer Myself?
Some dryer maintenance tasks are safe for homeowners to handle without tools or technical knowledge.
Cleaning the lint screen after every load, running a vacuum through the lint trap housing every few months, and inspecting the exterior vent flap for blockages are all things you can do to extend a dryer’s working life and reduce repair frequency.
Most component-level repairs are not. Replacing a heating element, a drive belt, a thermal fuse, or a thermostat involves disassembling the dryer cabinet, proper diagnosis of the failed component, sourcing the right replacement part for the specific model number, and reassembling without introducing new faults. Specialized tools are required for some of these steps, and a misdiagnosis at the part level is a common and avoidable outcome when the root cause is not properly identified first.
Gas dryer repairs involving anything beyond cleaning the lint system should always go to a licensed technician. Inspecting the gas supply components, burner assembly, or valve internally without proper certification creates a safety risk that no repair saving is worth.
The accurate answer to “can I fix my dryer myself” is: the maintenance tasks, yes; the component replacements, no.
Frequently Asked Questions
Is it worth repairing a dryer?
Most dryers under eight years old are worth repairing when the fault involves a single component. The 50 percent rule applies: if the repair estimate exceeds half the cost of a comparable new unit, replacement is usually the stronger financial choice. See the full breakdown at is dryer repair worth it.
Who fixes dryers in Toronto?
Toronto Appliance Repairs services electric and gas dryers across Toronto and the GTA, covering all major brands for heating element, belt, fuse, and thermostat repairs with same-day appointments available. Book dryer repair Toronto by calling 416-918-2700.
Where can I get same-day appliance repair in Toronto?
Toronto Appliance Repairs offers same-day dryer repair services across Toronto, North York, Scarborough, Etobicoke, Mississauga, and surrounding GTA communities. Call 416-918-2700 to confirm availability in your area. The diagnostic fee is $95 plus HST ($129 plus HST for gas), confirmed upfront and applied toward the repair cost on the same visit.
Book Dryer Repair With Toronto Appliance Repairs
Toronto Appliance Repairs serves homeowners across Toronto and the GTA with same-day dryer repair services for electric and gas dryers across all major brands — Whirlpool, LG, Samsung, GE, Frigidaire, Kenmore, KitchenAid, Maytag, and Electrolux.
Skilled technicians arrive with common replacement parts, handle every service call from diagnosis through repair, and confirm pricing before any work begins. Affordable service, no hidden fees.
Book dryer repair Toronto by calling 416-918-2700 today.
For a full list of appliance repair services across Toronto and surrounding areas, visit Toronto Appliance Repairs services.